2. Challenge #1 - Making the robot move from one point to another point using basic movements, Forward. Turning. Stop. This part was easy. But we did took long because it took us a long time before we noticed that one of the cables werent connected properly.
3. Robot Challenge #2 - Inside the box
This challenge was to Move the robot using the light sensor in an area of a square and to make sure The robot wont pass the area outside. The edges of the box area was black and we programed our robot to move out and turn away whenever the light sensor senses a dark color.
4. Robot Challenge #3 - Line Follower
This challenge was to move the robot following a black line without it going out somewhere.
I thought this one was going to be hard but it wasnt because i noticed that it was similar to the Inside the box challenge. I applied my logic and the concepts of programming.
5. Robot Challenge #4 - Wall Detection.
This one is about where you have to program the robot to run forward and stop until it detect the wall that is close. Then It moves back and turn a bit to go into a different direction. This repeats. This ones quite kind of easy.
6.Robot Challenge #5 -Wall Detection AND Line Follower
In this challenge we have to Use a sonar AND a light sensor to detect walls and to follow lines.
This challenge was hard because I wasnt able to finish this in time. The solution was simple but I failed to see it. After this challenge, I knew how programmers feel about technical difficulties because what you program isnt comming out as expected, you get really frustrated. Programming is work guys.
7.Robot Challenge #6 - Sound sensor.
This challenge was fun. We had to use the sound sensor to sense the sound for the robot.
We programmed it to move forward depending on the amount of sound it receives.
8.Robot Challenge #7- Robot data recorder.
This challenge was easy but I failed to do it in time... It wasnt like challenge 5 but it was surely something different. This challenge, we had to move our robot and get information on the amount of light there was in the designated spot.
9.Robot Challenge #8- Robot Counting lines.
Similar to challenge 7 we programmed our robot to record data.Record data of the amount of lines it passes as it runs forward. This one was kind of confusing at first but when I grabbed my brain and applied the programming concepts it became really simple. Really, Really simple.
10. Robot Challenge #9- Gradual Stop
This challenge was easy for me. Things were more clear to do than the past couple challenges.
Although it was a hard when I had to figure more things out when our teacher made extensions the challenge was done before the due date. We had to program our robot to move and gradually stop once it detects a wall. When the wall become tooooo close, it will back up.
11.Robot Challenge #10 - Attendance Check!
In this challenge, we have to program our robot to basically check attendance. So the robot will see the presence of object and collect data. Then later come back to the starting point and indicate the amount of object it detected (attendance!)
12.Robot FINAL challenge.
This one. Was a bit difficult challenge, yet soo simple..IT was surely easy for some people but I took a bit of time to do this. In this challenge i have to activate the robot after certain conditions. If the conditions does not follow then the display monitor will indicate 0 and it will not do anything. If the conditions follow then the robot will be activated.
No comments:
Post a Comment